WILD WATER PLUMBINGIdentifying the Source of Well Pump Problems

U.S. Navy Veteran Owned & Operated throughout greater Jacksonville, NC.

U.S. Navy Veteran Owned & Operated throughout greater Jacksonville, NC.

Well pump issues can disrupt your water supply, leading to low water pressure or no water at all.

This guide will help you troubleshoot and identify the source of common well pump problems.

Step 1:

No Water: No water coming from any fixtures.
Low Water Pressure: Weak water flow from faucets and showers.
Air Spitting: Air spurting from faucets along with water.
Strange Noises: Unusual sounds coming from the well pump or pipes.
High Electric Bills: Increased electricity usage without an apparent reason.

Step 2:

Circuit Breaker: Ensure the circuit breaker for the well pump is not tripped. Reset if necessary.
Power Switch: Verify that the pump’s power switch is on.

Step 3:

Location: Usually found near the pressure tank.
Inspection: Check for any visible damage or debris. Listen for clicking sounds, which indicate the switch is working.

Step 4:

Location: Usually found near the pressure tank.
Inspection: Check for any visible damage or debris. Listen for clicking sounds, which indicate the switch is working.

Step 5:

Pipes: Inspect pipes for any visible leaks, which can reduce water pressure.
Fittings: Tighten any loose fittings and replace worn-out ones.

Step 6:

Pump Motor: Listen for unusual noises, which may indicate a failing motor.
Pump Cycling: Frequent cycling on and off can indicate a pressure tank or switch issue.

Step 7:

Static Water Level: Measure the water level in the well. If it’s too low, the pump may not be able to draw water.
Seasonal Fluctuations: Consider seasonal changes in water levels that may affect the pump’s performance.

Step 8:

Foot Valve: Ensure the foot valve at the bottom of the well is not clogged or stuck.
Well Screen: Check for debris or mineral buildup on the well screen that could restrict water flow.

Step 9:

Inspection: For submersible pumps, check the control box for any visible damage or loose connections.
Capacitor: Ensure the capacitor is functioning properly, as a faulty one can prevent the pump from starting.

Responsive Iframe

Veteran Owned Plumbing Repair, Inspection, & Installation Services.